Magnetic Pod | digital files

DETAILS:

Detailed instructions can be found here. With this purchase you’ll receive the 3D printing files plus xTool Creative Space laser engraving files. Important things to note:

*This file package has only been tested to work with Bambu Studio and xTool Creative Space
**Files are for personal use only
***There are no physical items included with this purchase

WHAT’S INCLUDED WHEN PURCHASED:

• 3mf files compatible with Bambu Studio and PrusaSlicer

• STL files compatible with most slicer programs available

• xcs files (for use with xTool Creative Space) for the engraver designs (SVG files also included)

• Text elements should be editable in xTool Creative Space

• Files for alternate lid designs and triangular ring accessory also included

HARDWARE REQUIRED:

• Bambu X1 or P1 series printer is recommended

• Any 3D printer with at least a 150 x 150 mm bed

• Laser engraver with equipped with an IR laser rated at least for 2 watts of output

• Heat-set insert press with tips for M3 inserts

SOFTWARE REQUIRED:

• Bambu Studio 1.10.1.50 was used for this project but any slicer software that is able to be pause the print and later resume

• xTool Creative Space was used for this project but the SVGs can conceivably be adapted for any laser engraver software

Materials:

4x M3 countersunk flat head screws 30 mm (hex socket preferred)

4x M3 countersunk flat head screws 6 mm (hex socket preferred)

16x M3 heat-set insert 4mm deep

8x M3 stainless steel flat washers 6 mm OD, 3 mm ID, 0.5 mm thickness

21x 12x3mm Rare Earth Magnets (round disc)

Materials (optional):

1x M3 countersunk flat head screws 14 mm (hex socket preferred)

4x M3 buttonhead head screws 8 mm

1x M3 heat-set insert 4mm deep

1x Wireless LED strobe light with remote control

2x Triangle rings

LICENSE

These 3D print and laser engraver files, and the design represented by the files is copyrighted by Batch Studio. The author grants the license to use this 3D print file under the following terms: This file is for personal use only. It may not be used for commercial purposes unless explicit permission is granted by the author. The file and the design it represents may not be modified, altered, or used as a basis for other designs without permission from the author. This file may not be redistributed, shared, or resold in any form. For additional copies, please refer others to the original source where you obtained this file. If this design is displayed publicly, credit must be given to the author in a clear and visible manner. The author is not responsible for any damage, direct or indirect, that may arise from the use of this 3D print file. Users print this design at their own risk. For permissions or questions regarding these 3D pring, laser engraver, or other design files, please contact hello@batchmade.studio.